LEAKBLOK® Premium P200

Compressed Asbestos-Free Gasket

LEAKBLOK® Premium P200 gasket is made of Aramid Fiber and NBR Binder. It is suitable for portable water, oils, fuels, salt solution, mild acids & alkalis and gas line.

Category:

Description

Material Properties

ColorBlue(Black Printed)
CompositionAramid Fiber + NBR Binder
Fluids ServicePortable Water, Oils, Fuels, Salt Solution, Mild acids and alkalis, gas line
PressureShort-term peak
80bar(1160 psi)
TemperatureContinuous
-150℃(-238°F) ~ 220℃(428°F)
Short-term peak
-196℃(-321°F) ~ 350℃(660°F)
pH range4-11
Thickness(mm)0.8 ~ 3.2(mm)
Size(mm)1270(W)×1270(L), 1500(W)×1500(L)
Available in Rolls.
CertificatesLloyd’s & ABS Type Approval , TA-Luft(VDI 2440), WRAS, BS 7531 Grade Y

Fire Endurance Test(ISO 19921 & 19922)

Service Range

Area ASatisfactory area subject to chemical compatibility
Area BUsually suitable but required technical recommend by Khong Lieng
P×T(Max)psi ×°F(bar×°C) / 496,480(17,600)

Physical Properties

Test MethodDescriptionLEAKBLOK® P200
ASTM D792Density (g/cm3) 1.9
ASTM F152Tensile Strength
Across grain. MPa (kgf/mm2)
15.0(1.53)
ASTM F36
Procedure J
Compressibility (%)
Recovery (%)
9
71
DIN 3535 – 6Gas permeability (ml/min)≤ 0.01
DIN 52913Relaxation Stress(MPa)
-50MPa 16 hours @175°C
38.2
BS 7531Relaxation Stress(MPa)
-40MPa 16 hours @300°C
23.7
VDI 2440
(TA-Luft)
Leak rate
( mbar·l /(s·m) )
-at 150°C 48 hours
2·10-8

Immersion Properties

Test Method
ASTM F146
DescriptionLEAKBLOK® P200
at 150°C×5hrs
ASTM Oil no 3
Thickness Increase (%)3
at 20~30°C×5hrs
ASTM Fuel B
Thickness Increase (%)
Weight Increase (%)
6
9

Gasket Design Data

Thickness (mm)Gasket Factor (m)Min. Design Seating Stress(y)
Kgf/cm2 (psi)
3.22.00112(1600)
1.62.75260(3700)
0.83.50457(6500)

* All data are 1.5mm thickness typical value.

Innovative technology, LEAKBLOK® , absolutely distinguished from the traditional way of calendar roll production.

It specially invented with environmentally friendly solvent free process.

Compare with previous product, it shows strong durability and superior at low seating stress.

Suitable for use steam and clean line, excellent protection of fluid contamination.

Warning

  • Not available with max. temperature & pressure at the same time.
  • Guide line only, if outside this range contact us.
  • Do not re-use gaskets unless this is specifically indicated.
  • Do not use gasket compounds with gasket as this will adversely affect performance.
  • Please consult with Khong Lieng for application of steam & explosive gas line especially.
  • Please consult to maximum length with Khong Lieng’s sales team.
Open chat