KLINGERSIL® C-8200

Characteristic & main applications

Premium high-pressure gasket for use with acids.

Resistant to a wide variety of media.

Categories: ,

Description

Material

Glass fibres bonded with special acid-resistant elastomers.

pT diagrams

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.

1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation.

Technical Data – Typical values for 2mm thickness

Compressibility ASTM F 36 J 9%
Recovery ASTM F 36 J min. 55%
Klinger cold/hot compression, 25 MPa
thickness decrease at 23°C 7%
thickness decrease at 200°C 17%
% Density 1,7g/cm3

Dimensions of the standard sheets

Sizes: 1000 x 1500 mm, 2000 x 1500 mm.

Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm; other thicknesses and sizes on request.

Tolerances: Thickness acc. DIN 28091-1, length ± 50 mm, width ± 50 mm.

Surfaces

KLINGERSIL® gasket materials are generally furnished with surfaces of low adhesion. On request, graphite facings and other surface finishes on one or both sides are also available.

Function and durability

The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.

Certain grades of Klinger sheet jointing materials can be supplied with either a wire mesh or expanded metal reinforcing.

For information on fire safe materials in accordance with API or ISO as well as the international application approvals to which Klinger materials have been tested, please contact us.