KLINGERSIL® C-6327

Characteristic & main applications

Body gaskets for liquids and steam at lower pressures and temperatures and low bolt loads, e.g. transformer gaskets.

Thanks to the swelling in oil and fuels, it offers an excellent conformity with the flange at low surface loads.

Has AS4020 potable water certification.

Description

Material

Gasket material based on SBR-bound aramid fibres and anorganic fibres.

pT diagrams

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.

1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation.

Technical Data – Typical values for 2mm thickness

Compressibility ASTM F 36 J25%
Recovery ASTM F 36 J min.>45%
Stress relaxation DIN 52913
50 MPa, 16h/175°C25MPa
Thickness increase ASTM F 146
oil IRM 903: 5 h/150°C45%
fuel B: 5 h/23°C30%
Weight increase ASTM F 146
oil JRM 903: 5 h/150°C45%
fuel B: 5 h/23°C30%
Density1,7g/cm3

Dimensions of the standard sheets

Sizes: 1000 x 1500 mm, 2000 x 1500 mm

Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm

Tolerances: Thickness acc. DIN 28091-1, length ± 50 mm, width ± 50 mm. Other thicknesses, sizes and tolerances on request.

Surfaces

KLINGERSIL® gasket materials are generally furnished with surfaces of low adhesion. On request, graphite facings and other surface finishes on one or both sides are also available.

Function and durability

The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.

Open chat